You have prob­a­bly noticed that when using a con­ven­tion­al soap dish, water con­stant­ly remains in it. This leads not only to its stag­na­tion, but also to the repro­duc­tion of fun­gal bac­te­ria. To avoid these trou­bles and sim­ply get max­i­mum com­fort, it is bet­ter to use a spe­cial device called a dis­penser. The liq­uid soap dis­penser device allows you to get the right amount of the sub­stance at any time, and at the same time you can for­get about such things as built-up water and unpleas­ant smell.

liquid soap dispensers

After read­ing this arti­cle to the end, you will learn the names of liq­uid soap dis­pensers, the com­po­si­tion, a descrip­tion of each type, as well as oth­er inter­est­ing and use­ful infor­ma­tion.

You need to under­stand that they dif­fer in type, method of fil­ing and oth­er para­me­ters. To do this, you need to know the spe­cif­ic char­ac­ter­is­tics of liq­uid soap dis­pensers in order to make the right choice, and feel as com­fort­able as pos­si­ble in any con­di­tions.

Mechanical for home and office

The most pop­u­lar is a mechan­i­cal wall-mount­ed dis­penser with push-but­ton or push-but­ton soap deliv­ery. Such devices are the cheap­est and eas­i­est to use. and ser­vice. You can buy them for your home.as well as for use in closed teams with a small flow of peo­ple.


  • a fixed por­tion of soap is dis­pensed at the push of a but­ton;
  • there is no direct con­tact of hands with liq­uid soap in the con­tain­er (but there is still indi­rect con­tact);
  • low cost;
  • no mains con­nec­tion / bat­ter­ies required.

Of the short­com­ings — the hands are in con­tact with the but­tonIf your hands are dirty, you may stain the body of the prod­uct.

On sale there are dou­ble mechan­i­cal dis­pensers for pour­ing var­i­ous prod­ucts at the same time.

More advanced device — elbow dis­penser. The issuance of soap is car­ried out after press­ing the elbow on the lever. Hands do not come into con­tact with the device. The device allows you to main­tain a high­er lev­el of clean­li­ness even in places with high traf­fic. It is con­ve­nient to use such a dis­penser in the kitchen: it is easy to lath­er dirty hands with­out touch­ing the body of the device.

Many users choose the tork arm oper­at­ed soap dis­penser. It is suit­able for both pub­lic wash­rooms and pri­vate bath­rooms and kitchens. The soap sup­ply mech­a­nism works flaw­less­ly, the con­sump­tion of deter­gent is eco­nom­i­cal.

Flaw this vari­ety is not very attrac­tive. The device finds its appli­ca­tion in med­ical insti­tu­tions, in enter­pris­es where only employ­ees use it.

The Best Elbow Drive Dispensers

Elbow soap dis­pensers are spe­cial­ized acces­sories used to equip med­ical facil­i­ties, can­teens, lab­o­ra­to­ries and oth­er places that require main­tain­ing ster­ile con­di­tions. Their main dif­fer­ence from oth­er types is the pres­ence of a spe­cial han­dle, which you need to press with your elbow to get a por­tion of liq­uid soap. Such devices can­not boast of com­pact­ness and styl­ish design, but they have a sim­ple and reli­able mech­a­nism, as well as a bud­get cost.

Ksitex ES-1000

The advan­tage of this dis­penser is a styl­ish design that can dec­o­rate any san­i­tary room. The rec­tan­gu­lar wall-mount­ed mod­el received an impact-resis­tant body in white and gray. On the front side of the prod­uct there is a view­ing win­dow and a met­al lever for sup­ply­ing deter­gent.

The mod­el mea­sur­ing 23x11.5x19 cm will eas­i­ly fit into small spaces, and its intu­itive mech­a­nism of oper­a­tion will not raise ques­tions even for a child. Inside the case there is a replace­able car­tridge for 1 liter of liq­uid soap, as well as an addi­tion­al pump for the dis­in­fec­tor.


  • Styl­ish design;
  • Impact-resis­tant plas­tic;
  • Wall mount­ed com­pact design;
  • Spa­cious;
  • The pres­ence of an addi­tion­al pump for dis­in­fec­tant.


  • Too expen­sive for a mechan­ic.

Think arm-oper­at­ed soap dis­pensers can ruin a room’s design? You will change your mind when you see the com­pact wall-mount­ed dis­penser from Ksi­tex.

BXG Rel-BXG ESD-1000

The BXG elbow soap dis­penser is ide­al for hygien­ic indus­tri­al envi­ron­ments. A 1 liter plas­tic con­tain­er is built into a gray met­al rec­tan­gu­lar case. The mod­el is com­ple­ment­ed by a mas­sive met­al elbow lever, by press­ing which, it is easy to extract a small por­tion of liq­uid soap for one-time use.

The wall prod­uct has dimen­sions of 9.5x23x31 cm. This is easy to place in pub­lic bath­rooms, kitchens, food or con­fec­tionery shops. The dis­penser has a bud­get price, but increased wear resis­tance, so its pur­chase is advis­able for low-bud­get orga­ni­za­tions.


  • Uncom­pli­cat­ed, but reli­able mech­a­nism;
  • Large capac­i­ty;
  • High strength;
  • Uni­ver­sal design;
  • Wall mount.


The elbow dis­penser from BXG is opti­mal for equip­ping food pro­duc­tion, can­teen kitchens, restau­rants and cafes, as well as chem­i­cal lab­o­ra­to­ries and health­care facil­i­ties.

Vialli Elbow dispenser for liquid soap

Pur­chas­ing a soap dis­penser from Vial­li will not hurt the com­pa­ny’s bud­get. The prod­uct is opti­mal for indus­tries with a small num­ber of employ­ees. The white square body holds 500 ml of liq­uid soap. There is a plas­tic elbow lever on the front. The dis­penser itself has dimen­sions of 17x10.5x13 cm and is attached to the wall, so it does not take up much space even in a small room.


  • Com­pact­ness;
  • Strong plas­tic;
  • Uni­ver­sal design;
  • Bud­get price.


  • Short­er ser­vice life com­pared to oth­er elbow dis­pensers.

The inex­pen­sive elbow-oper­at­ed dis­penser is suit­able for equip­ping any small busi­ness that has high hygiene require­ments.

Touch for public places

It is desir­able to install sen­so­ry dis­pensers in shop­ping malls, hotels, restrooms of rail­way sta­tions and hos­pi­tals. With this device hands can be washed in con­di­tions of max­i­mum clean­li­ness. There is no con­tact with the dis­penser. It is enough to bring the hands to the faucet.

But sen­so­ry prod­ucts are much more expen­sive than mechan­i­cal and elbow prod­ucts, so at home their use is not always jus­ti­fied.

When choos­ing an auto­mat­ic dis­penser, pay atten­tion to the noise lev­el dur­ing pump oper­a­tion. In high-qual­i­ty mod­els, it is almost not felt. Try to find a device in which the man­u­fac­tur­er claims max­i­mum noise of 40 dBthen the dis­penser can be used at night.

On sale you can find con­tact­less mod­els that run on mains and on AA, C or D bat­ter­ies. Pri­or­i­tize appli­ances that work from dif­fer­ent types of food. Some brand­ed prod­ucts have a small draw­back — they only rec­og­nize well-known brands of bat­ter­ies, such as Dura­cell.

Before installing the appli­ance, adjust the soap dosage. You can choose eco­nom­i­cal or large por­tions. In mod­ern advanced mod­els, 2–3 soap / foam sup­ply modes are pro­vid­ed and the but­tons are in a con­ve­nient place. They do not have to be adjust­ed before instal­la­tion, which is much more con­ve­nient.

The touch dis­penser for deter­gent is suit­able for instal­la­tion in the kitchen. It is very con­ve­nient to use when you need to wash your hands after knead­ing dough or work­ing with meat.

How to install liquid soap dispenser

If you pre­fer a desk­top device, you won’t even need tools to install it: you just need to put the device in the planned place. You will have to tin­ker a lit­tle with the wall struc­ture:

  • Choose a mount­ing loca­tion that is nei­ther too high nor too low. Con­sid­er the height of all fam­i­ly mem­bers: both the child and the adult should be com­fort­able using the dis­penser.
  • Mark the desired loca­tion with a mark­er and drill a hole.
  • Using self-tap­ping screws or oth­er fas­ten­ers pro­vid­ed by the man­u­fac­tur­er, fix the device to the wall.

Such instal­la­tion work can be done inde­pen­dent­ly or seek help from spe­cial­ists. Some wall-mount­ed devices are attached with suc­tion cups or adhe­sive tape, but this method is not very reli­able.

For instal­la­tion of built-in mod­els, the help of pro­fes­sion­als is most often required. The only prob­lem is cut­ting the required hole to install the dis­penser.

Mounting method

The most suit­able option for home use — desk­top dis­penser. It is light­weight, com­pact and mobile. The acces­so­ry is easy to move from the bath­room to the kitchen. There are mod­els in which two types of fas­ten­ing are pro­vid­ed.

The dis­penser with two types of mount­ing can be used as a desk­top or wall-mount­ed ver­sion.

The only neg­a­tive: most desk­top dis­pensers are mechan­i­cal. But you can also find a con­tact­less mod­el that is rel­a­tive­ly inex­pen­sive, such as the pop­u­lar Xiao­mi auto­mat­ic soap dis­penser. The sen­sor is trig­gered in a quar­ter of a sec­ond after bring­ing the hands to the device. At the same time, there is pro­tec­tion against false pos­i­tives. The prod­uct has a futur­is­tic design, easy to clean, there is splash pro­tec­tion. The dis­penser is easy to main­tain: the soap con­tain­er is easy to detach, but you don’t have to do it often. The ves­sel is designed for 250, 320, 450 ml (the vol­ume depends on the mod­el), which is quite enough for a fam­i­ly or a small work team. Plus, there is a foam­ing func­tion (it is pro­duced by the Mini J microp­ump), which allows you to addi­tion­al­ly save on soap and does not set­tle for a long time. The per­cent­age of air and liq­uid in such foam is 12:1. The sav­ings when using this dis­penser is about 30% com­pared to con­ven­tion­al liq­uid soap dis­pensers.

Unlike many oth­er mod­els, the xiao­mi desk­top dis­penser runs on 3–4 AA bat­ter­ies, which last for six months. And to com­plete­ly for­get about replac­ing bat­ter­ies, choose a device with a built-in bat­tery. We rec­om­mend using 1.5V recharge­able bat­ter­ies for dis­pensers.

In pub­lic placescater­ing points, as a rule, hang wall dis­pensers. They can be both mechan­i­cal and sen­so­ry. Due to the secure fas­ten­ing, the device can­not be stolen. There is no risk of acci­den­tal fall and break­age, which is very impor­tant in places with an uncon­trolled flow of peo­ple.

Wall-mount­ed dis­pensers are usu­al­ly designed for a larg­er vol­ume of liq­uid than portable ones. On sale you can find mod­els with light indi­ca­tors of car­tridge con­sump­tion and bat­tery charge.

An inter­est­ing solu­tion is a uni­ver­sal wall-mount­ed dis­penser.

Mount­ed mod­els are mount­ed on the wall using the screws that are includ­ed in the kit, or dou­ble-sided tape. Fixed mount is more secureVel­cro is guar­an­teed to with­stand a small vol­ume. Do not hang liter units on tape.

Floor sen­so­ry dis­pensers are also installed in pub­lic places. They are attached to spe­cial met­al hold­ers. It is con­ve­nient to fill floor sen­so­ry dis­pensers with an anti­sep­tic for hand dis­in­fec­tion dur­ing an epi­dem­ic.

The non-con­tact method of dis­pens­ing the deter­gent ensures the high­est lev­el of hygiene.

An inter­est­ing option is a built-in dis­penser. It allows you to save space in a small bath­room or kitchen. Mount­ed on the wall, on a shelf, bath­room side, coun­ter­top.

Best Mechanical Soap Dispensers

Mechan­i­cal dis­pensers are dis­tin­guished by their sim­ple design and rea­son­able price. To get a small por­tion of soap, just press a spe­cial but­ton-lever. Such dis­pensers are less hygien­ic, but they are pro­duced from a vari­ety of mate­ri­als: ceram­ics, impact-resis­tant plas­tic, wood or met­al.

Blomus Sono Tramac

A strict acces­so­ry from the Ger­man brand Blo­mus will suc­cess­ful­ly fit into the mod­ern bath­room inte­ri­or. The oval-shaped bot­tle with a pump dis­penser deliv­ers a sin­gle dose of soap with one press.

In the man­u­fac­ture of the dis­penser, mat­te ceram­ics and kha­ki sil­i­cone are used. The vol­ume of the bot­tle is 250 ml. The prod­uct does not require com­plex care and will retain its per­fect appear­ance for many years — it is enough to peri­od­i­cal­ly wash it with water. A frag­ile, but orig­i­nal ele­ment of the inte­ri­or will appeal to women and cre­ate com­fort in the bath­room.


  • orig­i­nal design;
  • Made from qual­i­ty mate­ri­als;
  • Does not require com­plex care;
  • Com­pact but roomy;
  • Com­fort­able.


  • Frag­ile;
  • Not cheap.

Such a soap dis­penser will suc­cess­ful­ly fit into the inte­ri­or of the bath­room, made in a mod­ern, min­i­mal­ist, ori­en­tal or art deco style.

Losdi Algostar CJ1008S

A wall-mount­ed liq­uid soap dis­penser from a Span­ish man­u­fac­tur­er is uni­ver­sal­ly suit­able for pri­vate and pub­lic spaces. The mechan­i­cal­ly con­trolled rec­tan­gu­lar ver­ti­cal mod­el is made of stain­less steel, which guar­an­tees its increased wear resis­tance and main­tains an impec­ca­ble appear­ance.

Dis­penser capac­i­ty — 700 ml. The mod­el is equipped with a view­ing win­dow to mon­i­tor the full­ness. The reli­able dos­ing mech­a­nism pro­vides unin­ter­rupt­ed sup­ply of liq­uid with one press­ing. The dis­penser is pre­sent­ed in two shades: sil­ver and gold.


  • Saves space due to wall mount­ing;
  • Spa­cious;
  • Equipped with a view­ing win­dow;
  • Con­ve­nient dos­ing mech­a­nism;
  • Reli­able and prac­ti­cal case;
  • Two col­ors to choose from.


  • Requires reg­u­lar clean­ing with the use of spe­cial­ized prod­ucts.

Such a wall-mount­ed dis­penser is suit­able for equip­ping a bath­room in an apart­ment, bath­rooms in cafes, restau­rants and oth­er pub­lic places.

Decor Point Kitchen liquid soap dispenser (ceramic, with sponge)

The kitchen dis­penser from Decor Point impress­es with its styl­ish design, func­tion­al­i­ty and com­pact­ness. A round­ed con­tain­er made of light brown ceram­ic with a wood grain pat­tern has a small recess on one side for stor­ing a sponge. The mod­el is com­ple­ment­ed by a sil­ver pump, press­ing which allows you to extract a small dose of soap, suf­fi­cient to clean your hands.

The com­pact size of the dis­penser (10x10x17 cm) and thought­ful design make it ide­al for place­ment in the sink area. Instead of soap, you can pour dish deter­gent here.


  • Styl­ish design and uni­ver­sal col­or;
  • Func­tion­al;
  • Com­pact;
  • High build qual­i­ty;
  • Con­ve­nient mech­a­nism.


  • No col­or choice.

Such a dis­penser will become a func­tion­al ele­ment of decor in the kitchen, the inte­ri­or of which match­es the loft, coun­try, retro or Provence styles.

Swensa Rapas Soap dispenser transparent

The styl­ish design of the liq­uid soap dis­penser from Swen­sa will appeal to the fair sex. The embossed con­tain­er made of dense plas­tic, dec­o­rat­ed with a small pat­tern, is sim­i­lar in appear­ance to crys­tal decor ele­ments. But unlike expen­sive acces­sories, it does not break even if acci­den­tal­ly dropped on a sink or tile.

The rec­tan­gu­lar acces­so­ry has an opti­mal vol­ume (250 ml), so it is per­fect for small bath­rooms. At the base of the prod­uct is a sil­ver lever that ensures unin­ter­rupt­ed flow of liq­uid when it is pressed. Avail­able in trans­par­ent or with pur­ple body.


  • Spec­tac­u­lar per­for­mance in two shades;
  • Unbreak­able plas­tic con­tain­er;
  • Com­pact­ness;
  • Trou­ble-free care;
  • Bud­get price.


  • The plas­tic will dark­en over time.

A plas­tic dis­penser is suit­able for any bath­room, and its pur­chase will not hit your bud­get.


18 best soaps

Filling method

There are bulk and dis­pos­able mod­els. You already know that in large com­pa­nies, where a huge num­ber of peo­ple vis­it the toi­let per day, it is more hygien­ic to install a wall-mount­ed dis­penser. But the qual­i­ty of hand wash­ing also depends on the way it is filled. Bulk mod­els are filled from a can­is­ter and need reg­u­lar clean­ing. The­o­ret­i­cal­ly, this pro­ce­dure should be per­formed every time before the next fill­ing of the dis­penser. But in prac­tice, clean­ers do not always have time to wash the con­tain­er with high qual­i­ty. For a non-con­tact and elbow unit, this is not so impor­tant, although microbes and bac­te­ria also accu­mu­late there over time. But mechan­i­cal push-but­ton and pres­sure mod­els are con­stant­ly touched by hands, which vio­lates the steril­i­ty of the ves­sel with soap.

Dis­pos­able car­tridge refillsThey do not need to be washed and dis­in­fect­ed. They are easy and quick to replace with new ones. Replac­ing the car­tridge takes the staff only a few sec­onds. But such car­tridge dis­pensers are more expen­sive, and besides, man­u­fac­tur­ers of devices of a cer­tain brand require the use of only com­pat­i­ble replace­ment partsand they are not always easy to find.

With bulk struc­tures, the oppo­site is true.: they can be refilled with any­thing, a unit of liq­uid soap or foam from a can­is­ter is always cheap­er. But the con­tain­er itself is more expen­sive and, as a rule, is devoid of a lock­ing mech­a­nism.

There’s one more thing in this the advan­tage of dis­pos­able car­tridges is the pres­ence of a lockwhich elim­i­nates the pos­si­bil­i­ty of unau­tho­rized access to the wash­ing liq­uid.

In this way, bulk dis­pensers more suit­able for home useand dis­pos­able car­tridges — for pub­lic toi­lets andwhere high demands are placed on clean­li­ness.

There are two types of dispensers:

• bulk;

• car­tridge.

Liq­uid soap must be poured into the bulk dis­penser from a large con­tain­er, which is not very con­ve­nient. And you can choose a dis­penser that is refilled with dis­pos­able car­tridges. It is more expen­sive, but has the advan­tage of sav­ing soap and being eas­i­er to use.

Soap dis­pensers are an essen­tial acces­so­ry for wash­ing and hygiene of your hands. By pur­chas­ing them, you will bring a styl­ish touch to the design of your room.

Our best deals

What to fill?

Focus on this point when choos­ing a dis­penser, since many of them are designed for only one type of dress­ing. But there are mod­els capa­ble of sup­ply­ing liq­uids of vari­able vis­cos­i­ty. In oth­er cas­es, fill­ing will flow out of an unsuit­able con­tain­er or it will not work well.

There are such types of refu­el­ing:

  • liq­uid soap;
  • foam;
  • anti­sep­tic, alco­hol;
  • deter­gents for the kitchen;
  • sham­poo, show­er gel, hair con­di­tion­er.

Liq­uid soap choose medi­um den­si­ty. Too rare a sub­stance does not lath­er well, and a thick one slips out of the hands. Liq­uid soap is dis­pensed from the dis­penser in por­tions of approx­i­mate­ly one mil­li­liter.

Foam soap is used more eco­nom­i­cal­ly — one serv­ing con­sists of 0.6 ml. The tool foams well and does not slip out of the hands, so it is rec­om­mend­ed to buy it based on a large flow of peo­ple.

The anti­sep­tic is sprayed in a por­tion of 1.5 ml. In med­ical insti­tu­tions, an alco­hol-based agent is used. In every­day life, an anti­sep­tic on the water is suit­able. The first fights bac­te­ria more effec­tive­ly, but caus­es dry skin and has an unpleas­ant odor. The sec­ond acts on the skin more gen­tly.

Anti­sep­tic is often poured into floor dis­pensers. Ide­al for shops, den­tists, hos­pi­tals, chil­dren’s insti­tu­tions — floor con­tact­less dis­penser pow­ered by bat­ter­ies.

For an anti­sep­tic, choose a design with a spray. It even­ly sprays the dis­in­fec­tant onto your hands, and does not just flow in a trick­le. This is the most eco­nom­i­cal and fastest way to dis­in­fect hands in places where there is no wash­basin.

The sen­sor reacts in a frac­tion of a sec­ond when you bring your hands to the hole. There is pro­tec­tion against acci­den­tal oper­a­tion.

For bath­rooms, there are options for twin and triple dis­pensers for liq­uid soap, show­er gel and sham­poo.

You can refill the dis­penser not only with liq­uid soap, but also with show­er gel or sham­poo.

For kitchens, they also make com­bined options that can be used to store dish deter­gent and sponges.

Working principle of touchless soap dispenser

Touch­less soap dis­penser is the most mod­ern and high-tech kind of dis­pensers. The issuance of a por­tion of the liq­uid occurs with­out direct human impact on the device. The device is trig­gered by the pres­ence of elec­tron­ic sen­sors that react to the appear­ance of a hand in the area of ​​their action.

Struc­tural­ly, elec­tron­ic dis­pensers con­sist of sev­er­al parts:

  1. Soap con­tain­er. Occu­pies most of the inter­nal vol­ume of the dis­penser body. Usu­al­ly on sale there are devices with a capac­i­ty of 0.2–0.3 liters. How­ev­er, there are dis­pensers that can hold as lit­tle as 30–50 mil­li­liters of wash­ing liq­uid, or up to a liter or more. The lat­est mod­i­fi­ca­tions are intend­ed for pub­lic restrooms locat­ed in build­ings with a large num­ber of peo­ple — edu­ca­tion­al insti­tu­tions, air­ports, rail­way sta­tions, shop­ping cen­ters. For the home, con­tain­ers with a vol­ume of 150–250 ml are ide­al.
  2. Accu­mu­la­tor or dis­pos­able bat­ter­ies. The oper­a­tion of touch devices is pro­vid­ed by elec­tri­cal mech­a­nisms, there­fore, with a dis­charged bat­tery or dead bat­ter­ies, the elec­tron­ic dis­penser will not func­tion.
  3. Infrared sen­sor. The sen­sor reacts to the appear­ance of a palm between its two ele­ments — emit­ting a beam and receiv­ing it.
  4. An elec­tron­ic con­troller that receives a sig­nal from an IR sen­sor and sends a com­mand to dis­pense liq­uid.
  5. A dos­ing device that squeezes out a cer­tain por­tion of the liq­uid onto the palm of the hand.
  6. Addi­tion­al func­tion­al devices. For dif­fer­ent mod­i­fi­ca­tions, this can be an indi­ca­tor light, an audi­ble sig­nal warn­ing about the issuance of a por­tion of soap, and so on.

When a hand is detect­ed, the sen­sor sends a sig­nal about this to the elec­tron­ic con­troller. That, in turn, sends a com­mand to the dos­ing device, which is a pis­ton with an elec­tric dri­ve. When the con­tacts are closed, the pis­ton starts to move, giv­ing out a por­tion of the wash­ing liq­uid from the con­tain­er.

Does volume matter?

The vol­ume of the con­tain­er is cer­tain­ly impor­tant. If you cor­rect­ly cal­cu­late the amount of soap you need, you do not have to change it too often and wash the con­tain­er. For a large fam­i­ly, you should buy a soap dis­penser from 0.5 to 1 liter. It will last for sev­er­al weeks. The same for­mats are suit­able for hotels, hotels, small offices. For one or two peo­ple, a minia­ture mod­el with a vol­ume of 150–300 ml is enough. For cater­ing estab­lish­ments, shop­ping cen­ters, mod­els with a vol­ume of at least 1.2 liters are pur­chased. The most capa­cious dis­pensers are designed for 2 liters of liq­uid. With a large flow of vis­i­tors, even a two-liter dis­penser will have to be filled almost every day.

What is the best soap to use in a dispenser?

As you know, soap is dif­fer­ent, that is, it has dif­fer­ences in pH lev­els. Using the wrong flu­id can cause the inside of the dis­penser to become moldy or rusty over time. To pre­vent this, it is best to use soap with a pH of 6.5 to 8.5. If the lev­el is low­er, such sub­stances are more acidic and may lead to the above prob­lems.

liquid soap dispensers

Gen­er­al­ly speak­ing, a val­ue of 7 is a neu­tral pH lev­el. Sub­stances above this are alka­line, and below this are acidic. In most cas­es, liq­uid soap has enough pH to fight mold and dis­ease-caus­ing bac­te­ria.

Dosing mechanism

There are three main mech­a­nisms for dis­pens­ing liq­uid soap and oth­er dis­in­fec­tants:

  • jet,
  • spray,
  • foam.

The jet is usu­al­ly sup­plied with liq­uid soap. It is thick and the cor­re­spond­ing dis­penser has a large out­let.

In order for liq­uid soap to form foam, a spe­cial device is installed inside the dis­penser. As a result, it is pos­si­ble to sig­nif­i­cant­ly save deter­gent.

The mech­a­nism for spray­ing is nec­es­sary for uni­form spray­ing of the anti­sep­tic.


Nowa­days, both the most mobile and minia­ture mod­els, as well as large, roomy ones are offered. For the home, it is enough to lim­it your­self to the first option, the vol­ume of which is about 0.28 liters. The sec­ond is in demand for places with an intense flow of peo­ple, such as bars, cafes and restau­rants. For them, you should pur­chase a dis­penser of more than 1.2 liters. For offices and hotels, you can choose medi­um sizes — a lit­tle less than a liter, or 0.5 liters. It is worth not­ing that wall-mount­ed appli­ances are most­ly larg­er than portable desk­top ones.

Touch dispenser

Practical dispenser made of plastic or metal

When choos­ing a soap and anti­sep­tic dis­penser, con­sid­er the body mate­r­i­al.

The most pop­u­lar option for pub­lic places is a wall-mount­ed dis­penser made of high-qual­i­ty impact-resis­tant plas­tic or met­al. Don’t buy cheap plas­tic mod­els: they break quick­ly, smell bad, may con­tain tox­ic sub­stances, often have burrs and bumps, which leads to micro-cuts in the skin.

High-qual­i­ty plas­tic is envi­ron­men­tal­ly friend­ly, durable, has a smooth sur­face that is easy to clean. The best option is a new gen­er­a­tion of ABS plas­tic, which can with­stand a load on the body up to 140 kg. The mate­r­i­al is resis­tant to aggres­sive deter­gents. Such plas­tic is rec­om­mend­ed for use in chil­dren’s insti­tu­tions. A big plus of plas­tic dis­pensers is that they have a vari­ety of col­ors and designs.

And yet, the plas­tic dis­penser is infe­ri­or in strength to prod­ucts made of alu­minum or stain­less steel. A poor­ly secured unit may fall and crack. The met­al unit is van­dal-resis­tant, there­fore suit­able for pub­lic places: resis­tant to impacts, not afraid of cuts and chips, easy to clean, not sub­ject to cor­ro­sion.

Ksi­tex con­tact­less foam and liq­uid soap dis­pensers have proven them­selves well. Chrome-plat­ed met­al tanks look styl­ish, they do not leave fin­ger­prints and streaks.

It is very con­ve­nient when there is a glass or trans­par­ent plas­tic win­dow on the plas­tic or met­al case, through which the fill­ing lev­el of the con­tain­er is vis­i­ble.

Overview of the best models

Cur­rent­ly, a large num­ber of man­u­fac­tur­ers are engaged in the pro­duc­tion of auto­mat­ic dis­pensers for liq­uid soap. Con­sid­er sev­er­al mod­els that deserve the most pos­i­tive user reviews.

Soap dispenser Xiaoji MiniJ

Xiao­ji liq­uid soap dis­penser is struc­tural­ly com­posed of two parts:

  • The body itself with the equip­ment locat­ed inside it.
  • Con­tain­er for pour­ing wash­ing liq­uid.

Refers to a portable desk­top instal­la­tion type. The device works accord­ing to the jet prin­ci­ple, with­in ¼ of a sec­ond, giv­ing out a por­tion of soap to the sub­sti­tut­ed palm. At the same time, the man­u­fac­tur­er rec­om­mends dilut­ing deter­gents in a ratio of 1 to 12. Too thick com­po­si­tions do not pass well through the noz­zle of the dis­penser, and as a result can clog it. The device is pow­ered by three AA bat­ter­ies or recharge­able bat­ter­ies. On the back of the case there is a but­ton that turns the dis­penser into oper­a­tion. If nec­es­sary, for exam­ple, in the event of a long absence of res­i­dents, the device can be turned off so that the bat­tery ener­gy is not wast­ed on indi­ca­tor light­ing.

The switched on dis­penser, which is in the stand­by mode, sig­nals this with a white LED. The device has an addi­tion­al func­tion, in the form of a back­light, sig­nal­ing the min­i­mum dura­tion of hand wash­ing. After the device is trig­gered and a por­tion of soap is dis­pensed, the red indi­ca­tor lights up, which goes out after 10 sec­onds. All this time, accord­ing to the instruc­tions attached to the device, the wash­ing process should last.

Soap dispenser Xiaomi Mijia Xiaowei

Anoth­er mod­el of smart dis­pensers from Xiao­mi, designed for home use. This is a portable device with small dimen­sions and is designed to be installed on any flat sur­face — wash­basin, kitchen work­top, bath­room shelf. Despite the rel­a­tive­ly small vol­ume of the tank, accord­ing to the man­u­fac­tur­er, it is enough for 400 uses.

Mod­el spec­i­fi­ca­tions:
  • Type — mobile, inkjet.
  • The vol­ume of the tank is 320 ml.
  • The dis­pensed por­tion of soap is 0.8 ml.
  • The response time is 0.25 sec­onds.
  • Pow­er sup­ply — 3 AA bat­ter­ies.
  • Oper­at­ing time on one set of bat­ter­ies is 6 months.

Ceramic and glass for stylish design

For an ele­gant bath­room, a ceram­ic or glass dis­penser is suit­able. This is styl­ish, but not the most prac­ti­cal option. For pub­lic places, such units are not bought. But in a pri­vate bath­room they are the place.

Expen­sive mod­els are dec­o­rat­ed with rhine­stones, stones and oth­er decor to cre­ate a touch of lux­u­ry. But the most impor­tant thing is the har­mo­nious com­bi­na­tion of all acces­sories with the bath­room fur­nish­ings. Clear or frost­ed glass fits any inte­ri­or. Like ceram­ics, it is 100% sus­tain­able mate­r­i­al.

Glass dis­pensers are often hung on the wall to avoid acci­den­tal drops. But there are also desk­top mod­els made of faceted, frost­ed or trans­par­ent glass.


Since the soap dis­penser is a part of the inte­ri­or of the room, anoth­er selec­tion cri­te­ri­on is its design. On sale are mod­els that dif­fer in their appear­ance.

The styling may vary. Dis­pensers made in a clas­sic style are pop­u­lar.

Also, the atten­tion of many buy­ers is drawn to unusu­al mod­els that per­fect­ly com­ple­ment the mod­ern style of the inte­ri­or with their mag­nif­i­cent design.

When con­tact­ing online stores, buy­ers in cat­a­logs study descrip­tions to deter­mine the char­ac­ter­is­tics. Also, atten­tion is drawn to pho­tographs, since it is easy to choose a suit­able design from them.

Dispenser for the kitchen

The kitchen deter­gent dis­penser is a very handy tool. You can take a dual mod­el for liq­uid soap and dish deter­gent.

There are mod­els built into the coun­ter­top. Before buy­ing, pay atten­tion to the capac­i­ty of the acces­so­ry required for your fam­i­ly, design fea­tures (dis­pensers for the kitchen dif­fer in the type of jet, the pres­ence of a foam­ing ele­ment, the serv­ing por­tion of soap, etc.). The mate­r­i­al from which the flask is made direct­ly affects the func­tion­al­i­ty and dura­bil­i­ty. built-in dis­penser. The fact is that the dis­penser faucet is locat­ed above the table top, and the deter­gent con­tain­er is hor­i­zon­tal­ly sus­pend­ed under it and is actu­al­ly held on the thread. If the flask is made of low-qual­i­ty plas­tic, then the thread wears out over time and the design falls, and the soap splash­es.

Make sure the type of dis­penser you buy is suit­able for your sink. Mod­ern mod­els of sinks pro­vide holes for the dis­penser and mix­er, and in the old ones you have to cut it out. But this is not always pos­si­ble to do accu­rate­ly. In such cas­es, it is bet­ter to pay atten­tion to desk­top mod­els of deter­gent dis­pensers or a wall-mount­ed auto­mat­ic soap dis­penser.

The sim­plest design of a desk­top sponge dis­penser is a press. When you press the sponge with your hand, the pump starts to work and deliv­ers the required amount of liq­uid deter­gent. The con­ve­nience of the prod­uct is that it is both a hold­er for a sponge and a con­tain­er for clean­ing. The trans­par­ent walls of the plas­tic ves­sel allow you to visu­al­ly con­trol its full­ness.


  • light pres­sure for fast dos­ing;
  • capa­cious ves­sel;
  • neat design;
  • clean­ing agent sav­ings.

A more tra­di­tion­al ver­sion of the 2 in 1 sponge dis­penser and hold­er looks like a dou­ble con­tain­er: a soap bot­tle with a dis­penser and a cup or bowl for a sponge or oth­er small items. Com­bined ceram­ic mod­els with paint­ing look great.

What types of dispensers are there?

cartridge dispenser

Based on per­son­al pref­er­ences, you can choose two types of con­tain­ers:

  1. Dis­pos­able car­tridges. These are spe­cial bot­tles filled with soap. They are used only once and then dis­card­ed. The main advan­tage lies in max­i­mum hygiene and con­ve­nience. How­ev­er, please note that the car­tridge must be of the same man­u­fac­tur­er as the dis­penser itself, oth­er­wise it may sim­ply not be suit­able.
  2. Bulk con­tain­ers. They are spe­cial reusable con­tain­ers. As a rule, they are ini­tial­ly includ­ed in the kit along with the dis­penser. The main advan­tage of this type of con­tain­er is the absence of the need to buy new bot­tles every time. In this case, you are also not tied to a spe­cif­ic man­u­fac­tur­er, but sim­ply take the soap that you like and pour it into the tank, only after wash­ing it thor­ough­ly. When buy­ing such a con­tain­er sep­a­rate­ly, you should make sure that it fits your dis­penser.

Important points when choosing

When choos­ing a dis­penser, pay atten­tion to the fol­low­ing points:

  • fas­ten­ing reli­a­bil­i­ty;
  • how easy it is to remove and dis­as­sem­ble the wash­ing dis­penser;
  • where is the liq­uid dos­ing mech­a­nism locat­ed: in the device case or sep­a­rate­ly from it (the sec­ond option is prefer­able, since in the event of a break­down it remains pos­si­ble to repair);
  • man­u­fac­tur­er’s rep­u­ta­tion;
  • cus­tomer reviews;
  • who will use the device.

Choice mate­r­i­al, deter­gent sup­ply mech­a­nism and type of fas­ten­ing depends on the appli­ca­tion of the dis­penser. The most prac­ti­cal uni­ver­sal option is a wall-mount­ed dis­penser made of impact-resis­tant plas­tic or met­al with a mechan­i­cal way to sup­ply liq­uid soap. More expen­sive alter­na­tive — touch dis­penserwhich the ensures the high­est lev­el of hygiene. Ceram­ic and glass mod­els of small vol­ume are suit­able for fur­nish­ing an ele­gant bath­room. In shop­ping cen­ters and large com­pa­nies, you can install a floor con­tact­less dis­penser with an anti­sep­tic sprayer.

Based on these points, we have select­ed for you the top best dis­penser mod­els.

Disposable cartridges or bulk containers: what to choose

Soap Dis­penser Car­tridge

The soap dis­penser can be bulk or car­tridge. The first cat­e­go­ry has its advan­tages:

  • a high­er lev­el of hygiene, since car­tridges sim­ply can­not be reused;
  • con­ve­nient to replace these mech­a­nisms.

How­ev­er, it is often nec­es­sary to buy ele­ments from a spe­cif­ic man­u­fac­tur­er, due to which it is impos­si­ble to choose the most eco­nom­i­cal option. Bulk con­tain­ers are cheap­er, but pro­vide a low­er lev­el of hygiene. Before buy­ing a dis­penser, you need to decide in advance which option is com­fort­able for you.

Additional elements of the device

The dos­ing mech­a­nism can be built into the hous­ing or mount­ed sep­a­rate­ly. It makes more sense to con­sid­er the sec­ond option. First­ly, it can be sep­a­rate­ly removed for wash­ing, which allows you to main­tain a pre­sentable appear­ance of the prod­uct. Also, in the event of a break­down, you do not have to buy a new dis­penser — just change the pump to a new one.

For the home, you can pur­chase dou­ble appli­ances: soap is poured into one com­part­ment, and sham­poo is poured into the oth­er. Such dis­pensers store and por­tion­wise serve sev­er­al care prod­ucts at once. They will always be at hand and stored in a safe place.

When buy­ing, it is impor­tant to pay atten­tion to the soap dis­penser mount: how reli­able it is and whether it will loosen, and also pay atten­tion to whether the device can be quick­ly removed. This is impor­tant for com­fort­able clean­ing and refu­el­ing.

Some dis­pensers are com­ple­ment­ed by a stand for a wash­cloth or sponge. It is con­ve­nient to imme­di­ate­ly lath­er the prod­uct and use it for wash­ing or clean­ing.

Based on all of these fac­tors, choos­ing a soap dis­penser is not dif­fi­cult. The main thing is to indi­cate all the goals and require­ments for the device so that it can be used for many years, while remain­ing styl­ish and pre­sentable. A vari­ety of choic­es allows you to find a dis­penser for all occa­sions, from home to shop­ping cen­ters, train sta­tions, hos­pi­tals and cater­ing kitchens.