[ad_1]

The main pur­pose of the hood is to clean the air from odors, car­cino­gens, com­bus­tion prod­ucts. Grease on kitchen fur­ni­ture and uten­sils, yel­lowed wall­pa­per and dirty ceil­ings are the inevitable result of not using the hood.

The Russ­ian com­pa­ny Elikor has more than 50 mod­els in its cat­a­log, and the man­u­fac­tur­er him­self claims that every fourth hood sold in Rus­sia is made by him. The design of most hoods is “tra­di­tion­al”, how­ev­er, this does not mean “retro”, rather it is a tra­di­tion­al read­ing of all mod­ern styles.

All Elikor hoods are pro­duced on mod­ern Ger­man-made equip­ment, motors are pur­chased in Italy, the pro­duc­tion itself is locat­ed in Rus­sia. The com­pa­ny man­u­fac­tures prod­ucts not only for the domes­tic mar­ket, but also for export.

>

>

The Titan hood is one of the most pop­u­lar mod­els, and for good rea­son: it is one of the most suc­cess­ful hoods in terms of price and func­tion­al­i­ty, and it is also impor­tant that its design fits per­fect­ly into most mod­ern kitchens.

Which kitchen is Elikor Titan suitable for?

The Elikor Titan wall-mount­ed inclined hood is suit­able for almost any kitchen in an apart­ment or a pri­vate house. The dimen­sions of the hood are such that it can eas­i­ly fit even in the small­est kitchen. The com­pa­ny rec­om­mends the use of hoods in kitchens up to 16 square meters. m. For spa­cious kitchens in pri­vate homes or kitchen-liv­ing rooms, if nec­es­sary, it is pos­si­ble to use sev­er­al hoods.

If we talk about design, then Elikor Titan is quite con­sis­tent with fash­ion trends in inte­ri­or design: min­i­mal­ism, hi-tech, loft. The unit looks styl­ish and, no doubt, dec­o­rates the inte­ri­or.

Edi­tor’s Choice

Elikor Titan

Hood for mod­ern kitchen

Titan is one of the most pop­u­lar mod­els, and for good rea­son: the ratio of price and func­tion­al­i­ty of this mod­el is on top.

Get a price­More about the com­pa­ny

The main advantages of Elikor Titan

The design imple­ments a pro­gres­sive sys­tem of perime­ter air suc­tion. This means that the flow rate increas­es, its tem­per­a­ture decreas­es, which con­tributes to the con­cen­tra­tion of fat droplets, and they active­ly set­tle on the inlet fil­ter. Thus, much less dirt reach­es the engine, which facil­i­tates its oper­a­tion and increas­es its ser­vice life.

The grease fil­ter made of anodized alu­minum is not locat­ed hor­i­zon­tal­ly, but at an angle, and is cov­ered with a mir­rored pan­el. Air enters it through nar­row slots around the perime­ter of the device. More­over, the motor runs at low speed, which sig­nif­i­cant­ly reduces the noise lev­el.

High build qual­i­ty, an Ital­ian-made motor, a Ger­man pow­der coat­ing line, and a five-year brand­ed hood war­ran­ty make the device very attrac­tive. It is pos­si­ble to car­ry out war­ran­ty repairs and post-war­ran­ty ser­vice in the Elikor brand­ed ser­vice net­work. The kitchen will give you plea­sure for a long time with its appear­ance and fresh atmos­phere in your home.

Hood Elikor Titan in the interior of the kitchen

Characteristics of Elikor Titan

Dimensions and design

The hood fits per­fect­ly into the design of almost any kitchen and col­lects pol­lut­ed air over an elec­tric or gas hob.

The width of 60 cm is quite stan­dard for this type of equip­ment, and the depth of 29.5 cm is less than many oth­er hoods on the mar­ket. This means that the hood can fit into almost any inte­ri­or, even in the small­est kitchen.

White col­or is tra­di­tion­al for kitchen appli­ances. Black is loved by mod­ern design­ers, stain­less steel looks great in high-tech inte­ri­ors.

• Width 0.6 m;
• Depth 0.295 m;
• Height with false pipe 0.726 m;
• The device is avail­able in three design options: white, black and stain­less steel with black accents.

>

>

Power and performance

The man­u­fac­tur­ing com­pa­ny claims that the per­for­mance of the hood is opti­mal for a room of 16 square meters. m. Three speeds allow you to quite accu­rate­ly adjust the oper­at­ing mode of the device, but it is worth remem­ber­ing that at max­i­mum speed the motor wears out faster, makes more noise and con­sumes more ener­gy, and at the min­i­mum speed the air exchange rate in the room decreas­es.

• Pow­er 147 W;
• Pro­duc­tiv­i­ty 430 cubic meters / hour;
• Three hood speeds

Operating modes

The hood oper­ates in two modes:

• Extrac­tion mode with the removal of pol­lut­ed air out­side the premis­es;
• Recir­cu­la­tion mode, with the return of puri­fied air back to the kitchen.

The mode with the removal of pol­lut­ed air is prefer­able, but it requires the abil­i­ty to con­nect to exhaust ven­ti­la­tion or an addi­tion­al chan­nel for eject­ing air into the sur­round­ing atmos­phere. Tap­ping into the exhaust ven­ti­la­tion duct in par­al­lel with a water heater or heat­ing boil­er is pro­hib­it­ed, as well as con­nec­tion to the inlet ven­ti­la­tion duct. If these pos­si­bil­i­ties are exclud­ed, then it is nec­es­sary to use a scheme with recir­cu­la­tion.

Necessary accessories

To oper­ate the device in the exhaust mode with the removal of air from the room, it is nec­es­sary to addi­tion­al­ly pur­chase a cor­ru­gat­ed semi-rigid air duct with a diam­e­ter of 150 mm, a Flat 42P-430-KZD mor­tise block and a ven­ti­la­tion grill in the kitchen design style.

In the recir­cu­la­tion mode, it is manda­to­ry to use an F‑00 car­bon fil­ter. It is made of high­ly absorbent acti­vat­ed car­bon and cap­tures all the odors that fill the air dur­ing cook­ing.

The absorb­ing prop­er­ties of the fil­ter are main­tained for 160 hours, which cor­re­sponds to three to four months of reg­u­lar­ly turn­ing on the hood. But if smells in the kitchen appear before this time, then the fil­ter needs to be replaced imme­di­ate­ly.

Elikor Titan price in Russia

The hood belongs to the demo­c­ra­t­ic price seg­ment and is dis­tin­guished by mod­ern meth­ods of air purifi­ca­tion. The price of the device in online stores starts from 6,000 rubles for a white or black case and from 6,990 rubles for a stain­less steel ver­sion with black ele­ments.

Where to buy Elikor Titan

The Elikor Titan hood (and oth­er Elikor hoods) is in the assort­ment of most large online stores in Rus­sia. Also, at any time, you can order the hood on the offi­cial web­site of the man­u­fac­tur­er. Deliv­ery works through­out Rus­sia.

>

>

Edi­tor’s Choice

Elikor Titan

Ver­ti­cal cook­er hood

All Elikor hoods are pro­duced on Ger­man-made equip­ment, motors are pur­chased in Italy, pro­duc­tion is locat­ed in Rus­sia

All the advan­tages of “Titan“Other hoods

Customer Reviews

Cus­tomer reviews are tak­en from the Yandex.Market web­site, the author’s spelling is pre­served.

We have been using the hood for a long time, I like every­thing, espe­cial­ly the fact that it is very beau­ti­ful. I was afraid that traces would be vis­i­ble on white, but there is noth­ing of this, I wipe it with a damp cloth peri­od­i­cal­ly, and no dirt is vis­i­ble. Also, fin­ger­prints are not vis­i­ble, only if you look close­ly, per­haps. The price for an inclined type of hood is quite small, and we also took it at a dis­count using a pro­mo­tion­al code.

Yana Mazun­i­naSochi

I liked the design of the hood the most, because it looks very nice. But there are no com­plaints about the qual­i­ty either, the thrust is nor­mal, even at low speeds. Perime­ter suc­tion is cool, it seems that the area is small, but you can even see how steam enters this small gap. There­fore, noth­ing remains in the apart­ment, even the smells all dis­ap­pear.

Mark MarinkinNizh­ny Nov­gorod

The hood looks very cool, even though it is white, I thought it would be pale. I have no com­plaints about trac­tion, at max­i­mum speed it even pulls out smells from the kitchen. At min­i­mum speed, it is almost inaudi­ble, and in prin­ci­ple, there is enough trac­tion. There­fore, we often turn on the min­i­mum.

Pavel Zelen­ovRos­tov-on-Don

Elikor Titan installation instructions

Safety requirements

All work on main­te­nance and repair of the hood is car­ried out only when the pow­er is turned off and the pow­er plug is removed from the sock­et. The elec­tric stove must be turned off, the burn­ers of the gas stove must be extin­guished.

Preparation for work

Before installing the hood, open the front glass pan­el of the hood by pulling on its low­er edge. Then remove the alu­minum grease fil­ter by depress­ing its spring latch. The plate should be secure­ly cov­ered from the dust that is inevitable when drilling holes in the wall, it would even be bet­ter to put a hard coat­ing on it.

For instal­la­tion, you need a punch­er, dow­els, screw­drivers or a screw­driv­er. It is nec­es­sary to lay the pow­er cable to the loca­tion of the hood in the strobe or cable duct.

Installation order

1. The hood must be sus­pend­ed above the cen­ter of the stove so that its low­er edge is at a height of 0.65 m above the elec­tric stove or 0.75 m above the gas stove with an open fire.

2. Mark­ing holes for mount­ing is made accord­ing to the tem­plate, the descrip­tion of which is giv­en in the instruc­tion man­u­al for the device.

3. Dow­els 10x50 mm are insert­ed into 4 holes, where 2 self-tap­ping screws 6x50 mm are screwed.

4. The hood is hung on them with key­hole holes, then two more 6x50 mm screws are screwed into the remain­ing two dow­els and the hood is final­ly fixed to the wall.

5. Replace the fil­ter and close the front pan­el.

6. The cor­ru­gat­ed air duct lead­ing to the ven­ti­la­tion duct is cov­ered with a false pipe. For its instal­la­tion, it is nec­es­sary to install an addi­tion­al brack­et above the hood. Its width is adjustable for a spe­cif­ic mod­el, holes for dow­els are marked in accor­dance with the instruc­tions. The brack­et is mount­ed on self-tap­ping screws, after con­nect­ing the air duct, a false pipe is fixed on it.

>

>

7. The hood is con­nect­ed to a 220 V net­work with a fre­quen­cy of 50 Hz. A Euro sock­et with a ground­ing con­tact and a cir­cuit break­er with a trip­ping cur­rent of 2 A are required.

Rules for the operation and maintenance of Elikor Titan

• The hood is turned on, if nec­es­sary, at the begin­ning of the cook­ing process of any dish­es. In order to boil the ket­tle, the first, weak­est mode of oper­a­tion is enough. If it is sup­posed to fry fish or steaks, then the most pow­er­ful mode is need­ed.
• Con­t­a­m­i­nat­ed sur­faces of the hood are cleaned with a soft cloth moist­ened with dish­wash­ing liq­uid. Spe­cial com­pounds are used to clean the stain­less steel case.
• The alu­minum grease fil­ter is cleaned once a month. To do this, it is removed from the hood, and then washed by hand with a neu­tral deter­gent or in a dish­wash­er at a tem­per­a­ture of +60 degrees. It is pro­hib­it­ed to bend it. The char­coal fil­ter is dis­pos­able and must be replaced every 4 months or when unwant­ed odors appear in the kitchen.

>

>