[ad_1]

Sum­mer heat and thirst are insep­a­ra­ble con­cepts. In order to sat­is­fy the lat­ter, you need a clean drink and the oppor­tu­ni­ty to fill your glass with it. The best water cool­ers in 2022 will help you with this. Read about the most inter­est­ing mod­els in our mate­r­i­al.

Top 10 rating according to KP

1. Vatten L50REAT

The tech­ni­cal nov­el­ty of the cool­er with the bot­tom load­ing of the bot­tle is the cool­er made accord­ing to the “tea bar” scheme — “tea table”. Water is sup­plied through a tap installed at the top of the machine. The cool­er is equipped with two ket­tles: for mak­ing tea and for boil­ing water. The ket­tle for tea leaves has its own bed for heat­ing and main­tain­ing the tem­per­a­ture. In the ket­tle for boil­ing, the water starts to heat up after press­ing the hot water but­ton twice. Heat­ing is switched off when reach­ing 100 °С. The built-in dis­play shows the cur­rent water tem­per­a­ture. If the water in the ket­tle is cold, you can turn on the heat­ing with the cor­re­spond­ing but­ton. Cold water is sup­plied from the same faucet using a spe­cial but­ton.

Characteristics

Instal­la­tion	Floor
Cool­ing type	Elec­tron­ic
Bot­tle instal­la­tion	Low­er
Heat­ing pow­er	1350 W
Cool­ing pow­er	75 W
Height	77 cm
Width	31.5 cm
Depth	35 cm
addi­tion­al char­ac­ter­is­tics	There is a stor­age capac­i­ty, a cup­board for dish­es. One faucet for cold and hot water (installed at the top of the machine), sen­so­ry water sup­ply. Equipped with two ket­tles: for mak­ing tea and for boil­ing water.

Pros and cons

Con­ve­nience, func­tion­al­i­ty

Price

2. Aqua Work R71‑T

Bot­tom-load­ing cool­ers are becom­ing more and more pop­u­lar, despite their cost, and it’s easy to explain — easy bot­tle replace­ment, attrac­tive appear­ance. Here the man­u­fac­tur­er talks about the qual­i­ty of work­man­ship and assem­bly. The con­trol is sim­ple, 3 but­tons: for sup­ply­ing cold, hot and water direct­ly from the dis­tri­b­u­tion tank, with a tem­per­a­ture of 2–3 degrees below room tem­per­a­ture. Heat­ing is also good — at least 4 liters in 1 hour to a tem­per­a­ture of 85–95 degrees. Cool­ing: 2–3 liters per hour to a tem­per­a­ture of 7–10 degrees (com­pres­sor pow­er — 100 W). The hot water but­ton has a pro­tec­tion against acci­den­tal press­ing, which is con­ve­nient if the device will be used by chil­dren.

>

>

Characteristics

Pros and cons

3. AEL HC-66L

Accord­ing to the man­u­fac­tur­er, this cool­er will per­fect­ly fit into both the home inte­ri­or and the bound­aries of the office space. The faucets are made accord­ing to the “push mug” type and are marked with soft red and blue col­ors. The device has a com­pres­sor cool­ing sys­tem with a capac­i­ty of 550 W, which pro­vides heat­ing of 5 liters of water per hour to a tem­per­a­ture of 90 ° C. Cool­ing pow­er — 100 W. The per­for­mance of the cool­ing sys­tem is 2 l/h (water tem­per­a­ture 9–10°C). The body of the cool­er is made of stain­less steel with a front plas­tic insert, HC 66 white+silver is made of white plas­tic with a sil­ver front insert. The room tem­per­a­ture does not affect the cool­ing water lev­el.

Characteristics

Pros and cons

4. HotFrost 35AEN

This mod­el will per­fect­ly fit into the inte­ri­or of an office or any oth­er space due to its clas­sic col­or and design. The dis­penser is able to pro­vide hot and cold drink­ing water to a suf­fi­cient­ly large num­ber of peo­ple. The water bot­tle is installed in the low­er closed com­part­ment. There­fore, the process of its instal­la­tion is quite easy and fast. In addi­tion, the appear­ance of the cool­er only ben­e­fits from this. The device is equipped with con­ve­nient side han­dles with which you can eas­i­ly move it to the right place. Push-but­ton con­trol pro­vides com­fort­able adjust­ment of all func­tions of the device. It is very easy to pour water into the cup due to the pres­ence of a spe­cial lever at the spout, which is con­ve­nient to press with the cup itself.

Characteristics

Pros and cons

5. Smixx 16LD/E

This cool­er can pro­vide a prop­er drink­ing regime for your office or home. So, it can heat water up to 90 degrees and cool it up to 15. Due to the heat­ing pow­er of 550 W, it is dis­tin­guished by a capac­i­ty of 5 liters per hour. And the cool­ing rate is 1 liter per hour. The hot water tank has a capac­i­ty of one and a half liters, for cold water — 0.8 liters. The mug push faucet is very con­ve­nient to use. Styl­ish, com­pact Smixx 16 LD/E will not take up much space and will organ­i­cal­ly fit into the inte­ri­or of the room.

Characteristics

Pros and cons

6. Ecocenter G‑F4EC

From the man­u­fac­tur­er’s descrip­tion it fol­lows that this cool­er for bot­tling drink­ing water is inex­pen­sive and durable. It also fea­tures an inter­est­ing design and mod­ern col­or scheme. They make this cool­er mod­el attrac­tive enough for many buy­ers. The device has a push-but­ton way of pour­ing water, light indi­ca­tion of heat­ing and cool­ing oper­a­tion, as well as a con­ve­nient cab­i­net at the bot­tom of the equip­ment.

Characteristics

Pros and cons

7. ABC V170

Floor cool­er with heat­ing and com­pres­sor cool­ing of water, sim­i­lar to that used in refrig­er­a­tors. With a high cool­ing capac­i­ty of up to 2 l/h, these cool­ers are designed for increased usage. Com­pres­sor mod­els cool water to a tem­per­a­ture of 10 degrees. The hot water but­ton has a pro­tec­tion against acci­den­tal press­ing. The heat­ing capac­i­ty of this mod­el is more than 4 l/h. Before switch­ing on, be sure to read the instruc­tions. It is strict­ly for­bid­den to turn it on with­out water.

Characteristics

Pros and cons

8. RENOVA DC-F1C

An inter­est­ing mod­el with a com­pres­sor type of cool­ing, which is a pri­or­i­ty for many. The cool­er has a good heat­ing per­for­mance — 5 l/h. Cool­ing capac­i­ty — 2 l / h. A plus in this device is the excel­lent vol­ume of the lock­er — 16 liters. The bot­tle is placed on top. The cool­er can be pur­chased in dif­fer­ent col­or vari­a­tions.

Characteristics

Pros and cons

9. Aqua Work 720T

The Aqua Work 720‑T desk­top water cool­er with heat­ing but with­out a cool­ing sys­tem is an excel­lent replace­ment for an elec­tric ket­tle for bot­tled water at home and at work. There is a high-qual­i­ty case made of durable white plas­tic with round­ed lines. A 500 W heat­ing tank pro­vides 5 liters of hot water per hour with a tem­per­a­ture of at least 90–93 degrees. Water at room tem­per­a­ture will come from the sec­ond, “blue” faucet. The use of glass hold­ers in this mod­el is not pro­vid­ed by the man­u­fac­tur­er. The dis­penser is use­ful for every­one who does not need to cool drink­ing water from a 19-liter bot­tle installed on top.

Characteristics

Pros and cons

10. HIBERG UFK-653B

Excel­lent cool­er with com­pres­sor cool­ing. It should become your indis­pens­able assis­tant. The mod­el is made of qual­i­ty mate­ri­als. The bot­tle is installed from below. The heat­ing per­for­mance is decent — 5 l / h. Cool­ing — 2 l / h. The cool­er will require a lit­tle space, so take care of it in your office or home in advance.

Characteristics

Pros and cons

It is inter­est­ing

The best cof­fee mak­ers

How to choose a water cooler

The range of such goods, as we have seen, is large. But there is no need to rush to the first one that comes across. How to choose a water cool­er, Kom­so­mol­skaya Prav­da was told by a spe­cial­ist in the sale of house­hold appli­ances Roman Komarov. He offers to choose accord­ing to the char­ac­ter­is­tics.

Water cooling type

There are two types — elec­tron­ic and com­pres­sor. The first type of cool­ing is used more often and is more suit­able for desk­top cool­ers. These mod­els tend to be small­er and more envi­ron­men­tal­ly friend­ly. Be sure to ven­ti­late the room so that dust and dirt do not get into the cool­er. Mod­els with com­pres­sor cool­ing resem­ble those used in refrig­er­a­tors. They cool the water more, but are more frag­ile. Do not harm the struc­ture, oth­er­wise you will allow a refrig­er­ant leak. It is advis­able to trans­port such cool­ers only in an upright posi­tion. Some cool­ers do not have a cool­ing sys­tem at all. They serve hot water and water at room tem­per­a­ture. Such devices are cheap­er.

>

>

It is inter­est­ing

The best ther­mal pots

type of instalation

There are also two of them. Floor cool­ers are more pop­u­lar. They are suit­able for a large fam­i­ly or for the office. True, take care to allo­cate space to the device. For exam­ple, in the kitchen. Some mod­els have a cab­i­net for dish­es and a refrig­er­a­tor. Desk­top cool­ers are placed on a table or on spe­cial stands. They are opti­mal for low water con­sump­tion. Not suit­able for a large com­pa­ny.

Water supply

Cool­ers with a top sup­ply of water from a bot­tle are the most bud­getary. A con­tain­er of water is placed upside down on top. At the end of the water, the bot­tle must be changed. It takes man pow­er. Bot­tom feed mod­els are more expen­sive, but more con­ve­nient. You sim­ply install the bot­tle in a spe­cial com­part­ment and close it with a door so that it does not catch your eye. Water sup­ply is car­ried out using a pump or a hand pump. There are cool­ers with flow­ing water sup­ply. They process tap water into drink­ing water using a mul­ti-stage fil­tra­tion sys­tem. The devices are expen­sive and need to be replaced fil­ters.

Control method

Cool­ers with a mechan­i­cal sys­tem are easy to use. To pump water, you need to press the pump. The child may not be able to. In elec­tron­ic mod­els, you can set the tem­per­a­ture or a timer, some have indi­ca­tor pan­els where you can car­ry out var­i­ous actions with water. Such cool­ers are more expen­sive, but more func­tion­al.

Water taps

There are mod­els with glass pres­sure. You need to bring a mug to the tap and press the lever locat­ed in the frame. If you move the glass away, the water will stop flow­ing. This is a very sim­ple and con­ve­nient way. But it is designed for small vol­umes. To fill a large con­tain­er, the lever will have to be held for a long time. In oth­er mod­els, you can adjust the water sup­ply with but­tons on the case.

Additional functions

They will be a nice bonus for the buy­er. Car­bon­a­tion, fil­tra­tion, ozona­tion of water. Yes, the fil­ters will have to be changed, but with them the water is clean­er. Some mod­els have pro­tec­tion against chil­dren — this is also an impor­tant point, in par­tic­u­lar for fam­i­lies with chil­dren. The pres­ence of a cup­board for dish­es and a refrig­er­a­tor com­part­ment can also be a plus.

>

>